Cleaning related to Shackle Insulator
2023-04-13
Unclean Shackle Insulator is prone to flashover discharge, so it must be cleaned to restore it to its original insulation level.
Unclean Shackle Insulator is prone to flashover discharge, so it must be cleaned to restore it to its original insulation level. Ordinary areas are cleaned once a year, and dirty areas are cleaned twice a year (cleaned once before the fog season).
1. Power off and clean up.
Power-off cleaning means that after the line is powered off, the worker climbs on the pole and wipes it with a rag. If it is stained, it can be wiped with a damp cloth or detergent. If the insulator is not clean, it should be replaced.
2. Cleaning without power failure.
Usually use a brush or cotton yarn insulation rod to wipe off the insulation layer on the running line. Use the electrical properties and effective length of the insulating rod. The distance between the said personnel and live parts should comply with the specified voltage level, and special personnel should be monitored during operation.
Three, wash with electricity.
Clean the Shackle Insulator using both high and low water flushes. Scouring water. The effective length of the joystick. The distance between persons and live parts must comply with industry regulations.
Relevant News
undefined
CONTACT US
Address:219 Jiangning Road, Jingan District, Shanghai, China 200040
- WhatsApp -
LEAVE A MESSAGE
Copyright © 2022 Shanghai Junchen Power Co., LTD.