How to maintain and manage the Shackle Insulator
2022-12-07
In wet weather, the dirty Shackle Insulator is prone to flashover discharge, so it must be cleaned to restore the original green level.
In wet weather, the dirty Shackle Insulator is prone to flashover discharge, so it must be cleaned to restore the original green level. General areas are cleaned once a year, and polluted areas are cleaned twice a year (once before the fog season).
1. Power outage cleaning
Power outage cleaning means that after the line power outage, workers climb up the pole and wipe it with a rag. If it is not cleaned, it can be wiped with a damp cloth or with detergent. If it is still not cleaned, the Shackle Insulator should be replaced or a synthetic Shackle Insulator should be replaced.
2. Cleaning without power failure
Generally, the Shackle Insulator is wiped on the running circuit by using an insulating rod equipped with a brush or tied with cotton yarn. The electrical performance and effective length of the insulating rods used, and the distance between people and live parts should comply with the regulations of the corresponding voltage level, and special personnel must be supervised during operation.
3. Rinse with charged water
There are two methods of large water flushing and small water flushing. The flushing water, the effective length of the operating rod, and the distance between people and live parts must meet the requirements of the industry regulations.
Relevant News
undefined
CONTACT US
Address:219 Jiangning Road, Jingan District, Shanghai, China 200040
- WhatsApp -
LEAVE A MESSAGE
Copyright © 2022 Shanghai Junchen Power Co., LTD.